mavsa_onda
mavsa direccion

Firepolishers

fire_polisher_shrenko

The Firepolisher machines are used to polish with fire the joint edge, between the ring and the mould, on the glass article after pressing in Ring Press Production.

The installation of the Firepolisher Machine depends of the Customer Lay Out. It is possible to load the article using the Loader Conveyor & the Loader Mechanism.

To unload the article it is possible to use the Unloader Mechanism or Air-Gas System to put the Article in the Front Conveyor.

 

fire_polisher_2
Product Specifications: 
  • Heavy Structural Frame.
  • Transit Wheels and Leveling jack-screw.
  • High Speed Production.
  • Low Mantenance Cost.
  • Long usefull life.
  • Inline Burners with Individual Controls: Upward & Downward, Forward & Backward movements and desired Angle.
  • Steel Link Pitch between Ware Holders: 135 mm.
  • Hollow Spindles & Steel Wheels with bearings.
  • Rotation of Ware Holders in the fire zone.
  • Versatile: Full Range of Product Sizes.
  • SG, DG and TG Presses.
  • Automatic speed control according to the production speed changes of the press.
  • Automatic Handling with Loader Mechanism.
  • Quantity of Ware-Holders: 68 - 72 - 76 - 100 (DG operation)
Combustion System:

Individual Gas - Air regulation for each burner installed in a general manifold composed by:

  • Gas - Air Mixer device.
  • Zero Valve.
  • Gauged Valve.
  • Water Column Manometer.
  • Valves.
  • Air Fan & Filter.

 

 

OXY-GAS FIRE POLISHER MACHINE FOR ROUND, OVAL, SQUARE & RECTANGULAR ARTICLES.


Product Specifications: 
  • Heavy Structural Frame.
  • Transit Wheels and Leveling jack-screw.
  • Low Mantenance Cost.
  • Long usefull life.
  • Inline Burners with Individual Controls: Upward & Downward,Forward & Backward movements and desired Angle.
  • Steel Link Pitch between Ware Holders: 230 / 460 mm.
  • Hollow Spindles & Steel Wheels with bearings.
  • 90° Rotation or Full Rotation of Ware Holders in the fire zone depending of the type of article.
  • Versatile: Full Range of Product Sizes.
  • SG & DG Operation.
  • Automatic Handling.
  • Quantity of Ware-Holders: 96 (Length: 10,7 mts)
  • Automatic speed control for Intermittent or Continuous Movement according to the production speed changes of the press.
  • Cams to raise the glass wares in the entry and exit zone.
  • Servo Reductor Motor Drive.
 Combustion System & Burner Movement: 
  • Water Cooled Oxy - Gas  Burners.
  • Inline burners with individual controls: Upward & Downward, Forward & Backward movements and desired angle.
  • Independent Control Manifolds for each burner.
  • Servo Motor for Burners Movement.
banderitas
squared_firepolisher_web

GAS-AIR FIRE POLISHER MACHINE FOR ROUND, OVAL, SQUARE & RECTANGULAR ARTICLES

Product Specifications: 
  • Heavy Structural Frame.
  • Transit Wheels and Leveling jack-screw.
  • Low Mantenance Cost.
  • Long usefull life.
  • Steel Link Pitch between Ware Holders: 230 / 460 mm.
  • Hollow Spindles & Steel Wheels with bearings.
  • 90° Rotation or Full Rotation of Ware Holders in the fire zone depending of the type of article.
  • Versatile: Full Range of Product Sizes.
  • SG & DG Operation.
  • Automatic Handling.
  • Quantity of Ware-Holders: 60 
  • Automatic speed control for Continuous Movement according to the production speed changes of the press.
  • Cams to raise the glass wares in the entry and exit zone.
  • Motor Drive.
Combustion System & Burner Movement: 
  • Gas-Air  Burners.
  • Inline burners with individual controls: Upward & Downward, Forward & Backward movements and desired angle.
  • Independent Control Manifolds for two burners.
  • Gas-Air Mixer, Zero Valve, Needle Valve for Gas & Butterfly Valve for Air.

 

 

req180
Product Specifications: 

  • Heavy Structural Frame.

  • Transit Wheels and Leveling jack-screw.

  • Low Mantenance Cost.

  • Long usefull life.

  • Steel Link Pitch between Ware Holders: 180 mm.

  • Hollow Spindles & Steel Wheels with bearings.

  • Full Rotation of Ware Holders in the fire zone.

  • Versatile: Full Range of Product Sizes.

  • SG & DG Operation.

  • Automatic Handling.

  • Quantity of Ware-Holders: 68 

  • Automatic speed control for Continuous Movement according to the production speed changes of the press.

  • Cams to raise the glass wares in the entry and exit zone.

  • Motor Drive.

  • Combustion System & Burner Movement: 

Gas-Air  Burners.

  • Inline burners with individual controls: Upward & Downward, Forward & Backward movements and desired angle.

  • Independent Burners Control Manifolds.

  • Gas-Air Mixer, Zero Valve, Needle Valve for Gas & Butterfly Valve for Air.

  • One Side Insulator Wall. 

 

 

 

 

GAS-AIR DOUBLE GOB FIRE POLISHER MACHINE